CMG MTC Series - Capacitor Start, Capacitor Run (2 Pole)

CMG/Regal MTC Series

CMG’s MTC series are an ideal general purpose single phase cap start-cap run.

Motor design

The motors are low weight cast aluminium and boast options which are unequalled by any other range of small frame electric motor on the market today.

Multi-mount feature

The standard MT motor is supplied with the terminal box top mounted, and has detachable feet. The unique multi- mount design allows the motor feet to be removed and the motor mounted from any of the eight mounting pads. This feature means that for axial flow fans there is no need for a motor mount in the fan case, which enables quicker assembly times, lower cost, and fewer restrictions to air flow.

Standards and specifications

The main dimensions and rated outputs of the MT series generally conform to Australian Standard AS/NZS1359 (CENELEC kW-frame size allocation table) and International Standards IEC 60034 and IEC 60072.

Operating parameters

Standard MT series motors are designed with the following parameters:

  • Continuous duty (S1).
  • Single phase: 220-240 Volt 50Hz power supply.
  • Ambient temperatures up to 40°C.
  • Installation at altitudes up to 1000 metres.

Performance data is based on these parameters and may need adjustment for different conditions.

F class insulation, B class temperature rise

MT motors have F class insulation and B class temperature rise, ensuring cool running of the motor.

Degree of protection

Level of enclosure protection for the MT series is IP55 (increased IP ratings available). Shafts are fitted with an oil seal as standard.

Air movement application

Low weight design and the standard drilled and tapped hole in the shaft makes the MT series ideally suited for all air movement applications.

Gearbox fitment

The MT series small frame and unpainted design makes it ideal for fitting to smaller aluminum gearboxes.

Finish

Standard surface finish is unpainted clean sandblasted aluminum.

Bearings

Bearings fitted are deep groove ball type and are the same size both ends.

Top mounted terminal box

The standard position of the terminal box is on top of the motor, allowing for ease of connection to supply.

The terminal box is separate from the body of the motor allowing it to be rotated for additional convenience when connecting to supply.

  • 220-240V, 50Hz Single phase.
  • Capacitor start and Capacitor run.
  • IP55 protection.
  • Class F Insulation.
  • Aluminum Frame Motor, Endshield/Flanges.
  • Totally enclosed fan cooled.
  • B class Temperature Rise.
  • Manual Reset Overload Protector Fitted.
  • Multi-Mount Feet.
Motor Frame Bearing Size
56 6201-2RS
63 6201-2RS
71 6202-2RS
80 6204-2RS
90 6205-2RS
100 6206-2RS
112 6206-2RS

MTC DIMENSIONS

Foot (B3)

Frame Shaft B33 HD KK L33 L HB
63 11 144 174 M16 114 212 111
71 14 144 188 M20 104 255 117
80 19 176 222 M20 150 290 142
90S 24 176 238 M20 150 335 148
90L 24 176 238 M20 150 365 148
100L 28 176 262 M20 150 427 162
112 28 193 286 M25 150 453 174

Flange (B5)

M N P S T
115 95 140 10 3
130 110 160 10 3.5
165 130 200 12 3.5
165 130 200 12 3.5
165 130 200 12 3.5
215 180 250 15 4
215 180 250 15 4

Flange (B14)

M N P S T
75 60 90 M5 2.5
85 70 105 M6 2.5
100 80 120 M6 3
115 95 140 M8 3
115 95 140 M8 3
130 110 160 M8 3.5
130 110 160 M8 3.5

$350.00$935.00

Clear

CMG MTC Series - Capacitor Start, Capacitor Run (2 Pole)

SKU 25104562b8fb Category

Description

CMG/Regal MTC Series

CMG’s MTC series are an ideal general purpose single phase cap start-cap run.

Motor design

The motors are low weight cast aluminium and boast options which are unequalled by any other range of small frame electric motor on the market today.

Multi-mount feature

The standard MT motor is supplied with the terminal box top mounted, and has detachable feet. The unique multi- mount design allows the motor feet to be removed and the motor mounted from any of the eight mounting pads. This feature means that for axial flow fans there is no need for a motor mount in the fan case, which enables quicker assembly times, lower cost, and fewer restrictions to air flow.

Standards and specifications

The main dimensions and rated outputs of the MT series generally conform to Australian Standard AS/NZS1359 (CENELEC kW-frame size allocation table) and International Standards IEC 60034 and IEC 60072.

Operating parameters

Standard MT series motors are designed with the following parameters:

  • Continuous duty (S1).
  • Single phase: 220-240 Volt 50Hz power supply.
  • Ambient temperatures up to 40°C.
  • Installation at altitudes up to 1000 metres.

Performance data is based on these parameters and may need adjustment for different conditions.

F class insulation, B class temperature rise

MT motors have F class insulation and B class temperature rise, ensuring cool running of the motor.

Degree of protection

Level of enclosure protection for the MT series is IP55 (increased IP ratings available). Shafts are fitted with an oil seal as standard.

Air movement application

Low weight design and the standard drilled and tapped hole in the shaft makes the MT series ideally suited for all air movement applications.

Gearbox fitment

The MT series small frame and unpainted design makes it ideal for fitting to smaller aluminum gearboxes.

Finish

Standard surface finish is unpainted clean sandblasted aluminum.

Bearings

Bearings fitted are deep groove ball type and are the same size both ends.

Top mounted terminal box

The standard position of the terminal box is on top of the motor, allowing for ease of connection to supply.

The terminal box is separate from the body of the motor allowing it to be rotated for additional convenience when connecting to supply.

Additional information

Part No.

, , , , , , , , , , , , , , , , , , , ,

kW

, , , , , ,

Frame Size

, , , ,

Speed

, , , ,

Full Load Amps|220v

, , , , , ,

Full Load Amps|240v

, , , , , ,

Part No.kWFrame SizeSpeedFull Load Amps|220vFull Load Amps|240vPriceAdd to Cart
180-MTC-711-20.377127802.52.3$350.00
180-MTC-712-20.557127903.63.3$383.00
180-MTC-801-20.758028004.74.4$488.00
180-MTC-802-21.18028106.76.2$540.00
180-MTC-90S-21.590S281098.3$654.00
180-MTC-90L-22.290L281013.112$765.00
180-MTC-100L-23100L283017.415.9$869.00
180-MTC-711-2-B50.377127802.52.3$375.00
180-MTC-712-2-B50.557127903.63.3$408.00
180-MTC-801-2-B50.758028004.74.4$523.00
180-MTC-802-2-B51.18028106.76.2$578.00
180-MTC-90S-2-B51.590S281098.3$699.00
180-MTC-90L-2-B52.290L281013.112$822.00
180-MTC-100L-2-B53100L283017.415.9$935.00
180-MTC-711-2-B140.377127802.52.3$375.00
180-MTC-712-2-B140.557127903.63.3$408.00
180-MTC-801-2-B140.758028004.74.4$523.00
180-MTC-802-2-B141.18028106.76.2$578.00
180-MTC-90S-2-B141.590S281098.3$699.00
180-MTC-90L-2-B142.290L281013.112$822.00
180-MTC-100L-2-B143100L283017.415.9$935.00

Want To Know More?

Our products are used all over the place, be it a tiny cooling  fan in your computer to an extract fan in a tunnel..from a weeny little pump in your fish tank to a mud pumping monster