GWS PRESSUREWAVE™ SERIES

FEATURES

• Single diaphragm design

• CE/PED, WRAS, ACS, ISO:9001 approved

• Patented stainless steel water connection

• Virgin polypropylene liner

• Two part polyurethane, epoxy primed paint finish

• Leak free, o-ring sealed air valve cap

• Comprehensive testing

• No maintenance

PressureWave™ tanks are ideally suited for a wide range of applications, including booster systems, thermal expansion, irrigation systems, and hydraulic hammer arresting. The PressureWave™ Series is constructed of a virgin polypropylene liner combined with an FDA approved high grade butyl diaphragm. This is held against the wall of the tank with a steel clench ring. The brass air valve, sealed by a threaded o-ring valve cap, prevents air leaks. Water enters the tank through a patented stainless steel water connection. The diaphragm and liner are both reinforced in specific wear areas for longer life. All internal parts including the air valve are rounded to prevent piercing of the diaphragm in extreme conditions. The water connection uniquely provides a dual water/air seal ensuring a complete leak free and maintenance free pressure vessel. On the exterior the almond colored two-part polyurethane paint finish over an epoxy undercoating provides hundreds of hours of UV and salt spray protection.

PressureWave™ tanks are quality tested at several stages on the production line to insure the structural integrity of every tank.
PressureWave™ tanks represent the best value for the investment and are the best quality pressure vessels available today.

$68.00$916.00 +GST

Clear

GWS PRESSUREWAVE™ SERIES

Description

FEATURES

• Single diaphragm design

• CE/PED, WRAS, ACS, ISO:9001 approved

• Patented stainless steel water connection

• Virgin polypropylene liner

• Two part polyurethane, epoxy primed paint finish

• Leak free, o-ring sealed air valve cap

• Comprehensive testing

• No maintenance

PressureWave™ tanks are ideally suited for a wide range of applications, including booster systems, thermal expansion, irrigation systems, and hydraulic hammer arresting. The PressureWave™ Series is constructed of a virgin polypropylene liner combined with an FDA approved high grade butyl diaphragm. This is held against the wall of the tank with a steel clench ring. The brass air valve, sealed by a threaded o-ring valve cap, prevents air leaks. Water enters the tank through a patented stainless steel water connection. The diaphragm and liner are both reinforced in specific wear areas for longer life. All internal parts including the air valve are rounded to prevent piercing of the diaphragm in extreme conditions. The water connection uniquely provides a dual water/air seal ensuring a complete leak free and maintenance free pressure vessel. On the exterior the almond colored two-part polyurethane paint finish over an epoxy undercoating provides hundreds of hours of UV and salt spray protection.

PressureWave™ tanks are quality tested at several stages on the production line to insure the structural integrity of every tank.
PressureWave™ tanks represent the best value for the investment and are the best quality pressure vessels available today.

Additional information

Part No.

, , , , , , , , ,

Litre

, , , , , , , ,

Thread

Max Pressure

Description

, ,

Part No.LitreThreadMax PressureDescriptionPriceAdd to Cart
445-100221”10 barInline$68.00
445-100881”10 barInline$110.00
445-1018181”10 barInline$125.00
445-2020201”10 barHorizontal$172.00
445-2060601”10 barHorizontal$427.00
445-3035351”10 barVertical$240.00
445-3060601”10 barVertical$390.00
445-3080801”10 barVertical$510.00
445-31001001”10 barVertical$578.00
445-31501501”10 barVertical$916.00

Want To Know More?

Our products are used all over the place, be it a tiny cooling  fan in your computer to an extract fan in a tunnel..from a weeny little pump in your fish tank to a mud pumping monster