Mascontrol Pump Controller

The Mass Control WTMCU22 auto pump controller is a heavy duty device to control and protect a single phase pump up to 2.2Kw (16A). The controller has 1 1/4″ ports for higher flow rate with less pressure drop. The controller will activate the pump when the system pressure drops below 2.2bar and turn pump off when pressure is above minimum required and the flow has stopped.

It will protect the pump from damage in case of a run dry failure and can be restarted with simple push button re-start.

Technical details:

  • Max pressure: 10Bar
  • Operating temperature range: -0 to +60°C
  • Connection Thread: 1¼ ” male
  • Minimum pump pressure: 3.5Bar
  • Maximum pump pressure: 10Bar
  • Genuine Italian Controller

Clear

Part No.VoltsMax AmpsTurn on Pressure*PrewiredDescriptionStockPriceAdd to Cart
228-WTMCU230162.2NO1 AVAILABLE$310.00

The Mass Control WTMCU22 auto pump controller is a heavy duty device to control and protect a single phase pump up to 2.2Kw (16A). The controller has 1 1/4″ ports for higher flow rate with less pressure drop. The controller will activate the pump when the system pressure drops below 2.2bar and turn pump off when pressure is above minimum required and the flow has stopped.

It will protect the pump from damage in case of a run dry failure and can be restarted with simple push button re-start.

Technical details:

  • Max pressure: 10Bar
  • Operating temperature range: -0 to +60°C
  • Connection Thread: 1¼ ” male
  • Minimum pump pressure: 3.5Bar
  • Maximum pump pressure: 10Bar
  • Genuine Italian Controller

Want To Know More?

Our products are used all over the place, be it a tiny cooling fan in your computer to an extract fan in a tunnel..from a weeny little pump in your fish tank to a mad pumping monster.
Scroll to Top
{"cart_token":"","hash":"","cart_data":""}