Multi-wing D Series Impellers

The Multi-Wing D series impellers covers diameters from 360mm up to 660mm. The relatively small diameter and the broad, paddle-shaped profile of the fan blades makes the D series ideal for smaller heat exchanger applications such as oil coolers, air-cooled condensers and dry coolers. With fan blades of glass reinforced polyamide it can be used in low temperature evaporator applications as well. The D series provides a successful combination of high airflow and high-pressure rates at low speeds and produces low noise levels. The Multi-Wing D series are highly cost-efficient due to the fact they are made up of a small number of components.

Contact Argon Distributors with motor data and air flow requirements for fan selection.

Design Features

• Injection molded impeller of engineered thermoplastic materials. The fan blades are molded in pairs of two.
• Impeller has 2 or 4 fixed pitch, positively set fan blades. The fan blades have a unique broad paddle shaped profile and are available in 4 standard pitch angles of 25°, 30°, 35°, and 40°.
• Only available in a configuration where the fan blades rotate in a clockwise direction when facing the air stream. Form A, CW forced or B, ACW induced.
• One-piece aluminium-alloy boss, which is available in a range of bore/fixing configurations.

Materials

The bosses are as standard manufactured in a pressure die cast silumin alloy (EN AC-Al Si12Cu1(Fe)).

The fan blades are available in 2 different materials:
PAGAS Anti static glass reinforced polyamide (Custom Blade Material – POA)
Temperature range: -40ºC to +110ºC
PAGI Glass reinforced polyamide, industrial quality. (Standard Blade Material Supplied)
Temperature range: -40°C to +110°C

$162.00

Clear

Multi-wing D Series Impellers

SKU f88c20726ea8 Category

Description

The Multi-Wing D series impellers covers diameters from 360mm up to 660mm. The relatively small diameter and the broad, paddle-shaped profile of the fan blades makes the D series ideal for smaller heat exchanger applications such as oil coolers, air-cooled condensers and dry coolers. With fan blades of glass reinforced polyamide it can be used in low temperature evaporator applications as well. The D series provides a successful combination of high airflow and high-pressure rates at low speeds and produces low noise levels. The Multi-Wing D series are highly cost-efficient due to the fact they are made up of a small number of components.

Contact Argon Distributors with motor data and air flow requirements for fan selection.

Design Features

• Injection molded impeller of engineered thermoplastic materials. The fan blades are molded in pairs of two.
• Impeller has 2 or 4 fixed pitch, positively set fan blades. The fan blades have a unique broad paddle shaped profile and are available in 4 standard pitch angles of 25°, 30°, 35°, and 40°.
• Only available in a configuration where the fan blades rotate in a clockwise direction when facing the air stream. Form A, CW forced or B, ACW induced.
• One-piece aluminium-alloy boss, which is available in a range of bore/fixing configurations.

Materials

The bosses are as standard manufactured in a pressure die cast silumin alloy (EN AC-Al Si12Cu1(Fe)).

The fan blades are available in 2 different materials:
PAGAS Anti static glass reinforced polyamide (Custom Blade Material - POA)
Temperature range: -40ºC to +110ºC
PAGI Glass reinforced polyamide, industrial quality. (Standard Blade Material Supplied)
Temperature range: -40°C to +110°C

Additional information

Kit Set code

, , , , , , , ,

Airflow direction

Pitch

, ,

Maximum diameter

Bore size

, ,

Kit Set codeAirflow directionPitchMaximum diameterBore sizePriceAdd to Cart
320-8DR30-012A or B30?6601/2"$162.00
320-8DR30-019A or B30?66019mm$162.00
320-8DR30-034A or B30?6603/4"$162.00
320-8DR35-012A or B35?6601/2"$162.00
320-8DR35-019A or B35?66019mm$162.00
320-8DR35-034A or B35?6603/4"$162.00
320-8DR40-012A or B40?6601/2"$162.00
320-8DR40-019A or B40?66019mm$162.00
320-8DR40-034A or B40?6603/4"$162.00

Want To Know More?

Our products are used all over the place, be it a tiny cooling  fan in your computer to an extract fan in a tunnel..from a weeny little pump in your fish tank to a mud pumping monster